After-sales Service: | Response in 12 Hours |
---|---|
Warranty: | 1 Year |
Standards: | D1384 |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Introduction:
The main principle of the Corrosion Analyzer is:
six typical metals used in the engine cooling system are processed into test pieces, weighed, connected into test piece bundles, and then completely immersed in the specified samples. At the end of the test, take out the test piece, weigh it again after cleaning, and evaluate the corrosion according to the mass change value of the corrected test piece before and after the test.
This Corrosion Analyzer is applicable to engine coolant and its concentrate with high boiling point and low temperature, as well as engine cooling system rust inhibitor.
Specifications:
1 | Applicable standards | ASTM D1384, SH/T0085 |
2 | Heating mode | electric heating pipe |
3 | Temperature control mode | digital PID temperature controller |
4 | Voltage display | voltmeter |
5 | Working units | 3,can extend to 4-6 |
6 | Timing method | digital timer |
7 | Pressure control | pressure stabilizing valve |
8 | Refrigeration method | low temperature ciruclating water |
9 | Flow speed control | flowmeter |
10 | Total power | 2500W |
11 | Dimension | 690*410*760mm3 |
12 | Weight | 31KG |
13 | Power supply | AC220V 50HZ |
Suppliers with verified business licenses