BS 476-6 Fire Spread Index Test Equipment for Wall and Ceiling Lining

• After-sales Service: Response in 12 Hours
• Warranty: 12 Months
• Test Standard: BS476-6
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: FPT
• Power Supply: 230 Volts AC 50Hz.10A
• Weight: 46kg
• Dimension: 400mm (W) X 600mm X (H) X 300mm (D)
• Gas Supplies: Standard Test Gas G112
• Pressure: 1kp
• Dimension of Controller: 400mm (W) X 500mm X (H) X 400mm (D)
• Heat Output of The Lamp: 530j/M2
• Operation: Automatic
• Color: White
• Heat Radiation Source: Quartz Radiator
• Quantity of Quartz Radiator: 2 PCS
• Power of Quartz Radiator: 1000W
• Quantity of Sample Holder: 3 PCS
• Transport Package: Plywood Case
• Specification: Stainless steel
• Trademark: AI
• Origin: China
• HS Code: 9027809990
• Production Capacity: 30 Sets/Month

Product Description

Introduction

The BS 476-6 test method is a measurement method for the flame propagation performance of materials, mainly used to evaluate the fire resistance of wall and ceiling linings, and the measurement results are expressed in flame propagation index.
During the test, the test piece is exposed to a tube burner, and the heat output of the lamp is 530J/m2. After the test for 2 minutes and 45 seconds, the total power of the two electric heaters is adjusted to 1800 watts. When the test is 5 minutes, the power was reduced to 1500 watts, and then the power is maintained unchanged until the end of the test, and the total test time was 20 minute.

 

Feature

1. The BS 476-6 Fire Propagation Index Test Apparatus uses stainless steel box support frame;
2. Calcium silicate board combustion chamber;
3. BS 476-6 Fire Propagation Index Test Apparatus has three sample holders, stainless steel wrapping methods;
4. Two 1000W quartz radiator devices provide heat radiation to the sample;
5. T-type burner provides open flame burning method for the sample;
6. The thermocouple continuously records the difference between the temperature in the chimney and the room temperature;
7. The power output is automatically controlled, and the output power is automatically adjusted according to the test time;
8. The computer automatically processes data and can print test reports.

 

Data Acquisition system of BS 476-6 Fire Propagation Index Test Apparatus:

• Prompted software interface

• Data recording and display of cowl temperature against time

• Data recording and display of ambient temperature against time

• Display of power value in kW

• Calibration routine

• Calculation of output rise and calibration value

Installation requirements of BS 476-6 Fire Propagation Index Test Apparatus

Electrical	230 volts Nominal 10 Amps
Ambient Temperature	10°C to 35°C
Gas supplies	The gas supply specified in the Standard is Standard test gas G112, as specified in BS 4947
Flow	Gas flow for burner adjustable from 0 to 5 nl/min
Pressure	1KPa
Dimensions	Apparatus: 400mm (W) x 600mm x (H) x 300mm (D) Control module: 400mm (W) x 500mm x (H) x 400mm (D)
Weight	46KG
Applicable standards	BS476-6

 

Customer Feedback 

Germany

USA

Transporation

FAQ
1.What's the delivery time?
About 40 days .

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.