ASTM D5182 Instrument for Evaluating The Scuffing Load Capacity of Oils (FZG Visual Method)

• After-sales Service: Response in 12 Hours
• Warranty: 1 Year
• Test Standard: ASTM D5182
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: AIC-5182
• Test Method: Fzg Visual Method
• Max.Torque: 1kn. M
• Max. Loading Class: 13
• Motor Power: 6.5/8kw
• Motor Speed: 1450/2880 R/Min
• Gear Box Volume: 1.25L
• Heating Power: 0.5X3=1.5kw
• Power Supply: AC220V±10V 50Hz
• Dimension: 1390X750X1082mm
• Function: Evaluating The Scuffing Load Capacity of Oils
• Control: Industrial PC
• Language: English
• Transport Package: Plywood Case
• Specification: Small
• Trademark: AI
• Origin: China
• HS Code: 9031809090
• Production Capacity: 50 Sets/Month

Product Description

Introduction
FZG gear wear test machine is a multi-purpose testing machine.It can be used for the evaluation of the scuffing load capacity of the lubricant, also can be customized according to client's demands. It is usually using for gear bending fatigue strength and gear touch fatigue strength test.

This FZG scuffing load capacity testing equipment confirms to GB/T 13672-92 standard test method for scuffing load capacity of gears,ASTM D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method), and SH/T 0366-1992 lubricant carrying capacity test method (CL-100 Gear machine method)

 

Technical specification:

1	Max. torque	1Kn. m
2	Max. loading class	13
3	Temperature control accuracy	±2ºC
4	Motor power	6.5/8kw
5	Motor speed	1450/2880 r/min
6	Gear box volume	1.25L
7	Heating power	0.5X3=1.5kw
8	Dimensions	1390X750X1082mm

Working conditions

1.The fluctuation range of the power supply voltage should not exceed the rated value ± 10% and the fluctuation range of the frequency should not exceed 2% of the rated value.
2.Test FZG test equipment should be installed horizontally and the installed base should be smoothly. The horizontal error for the host workbench aspect direction should not exceed 0.2/1000.
3.Room temperature 10 º C-35 º C.
4.The environment no vibration, no strong magnetic interference and non-corrosive media.
5>Relative humidity less than 80%.

Structural characteristics and working principle
1. Loading mode
This FZG scuffing loading capacity test equipment is a dynamic closed-loop configuration, and load mode adopts rod hanging weights mode.
The loading lever is hung on the load sheave clutch. By hanging weights plus through fastening loaded clutch nut and make the two sheave tighten which installed on the loaded clutch. Then remove the weights and the loading lever and you can readout the torque on the clutch torque measurement.

2. Installation and adjustment
Make the FZG test machine at the level of the floor and mat three horns. Put the spirit level on the test table. By adjusting the horn to make the vertical and horizontal direction error do not exceed 0.2/1000.
The fzg test machine host should be placed separately from the control cabinet to avoid the noise and pungent odor when the testing machine working. After the start of the FZG test machine, person can not inter into the room which the machine placed.
The test procedure in accordance with the the "lubricant carrying capacity assay (CL-100 gear machine method) SH/T0306-92" provisions.

 

 

 

Factory overview

Customer Feedback 

Germany

USA

Package

FAQ
1.What's the delivery time?
About 30 days.

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.