| Customization: | Available |
|---|---|
| After-sales Service: | Response in 12 Hours |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
This flame propagation test equipment is designed and manufactured according to the test requirements of QC / T 730-2005 and ECE R118 Annex 10 automotive electrical cable burning test. This integrated machine is intelligent, with PLC and touch screen intelligent control; automotive cable burning test program; you can freely select the required test program on the screen after booting; the program time is freely set.
The vertical burning rate tester automatically controls the ignition time and automatically records the test time , flameout time, etc.The test data system is automatically saved and can be freely recalled.
Cabinet and clamp
1.Cabinet size: length 1200mm X width 600mmX height 1300mm;
2. Oversized test cabinet 0.55m³ to ensure sufficient air supply for the test;
3.Paint baking treatment of the cabinet; internal baking black paint (standard requirements) ,corrosion resistance;
4 The flame propagation tester is composed of a test part and a control part and adopts an integrated design, which is convenient for on-site installation and debugging.
5.Large-scale glass observation window, beautiful and elegant; easy to observe the burning state of the sample;
6.Advanced industrial appearance design and test operation consider ergonomic design, easy to touch the sample.Burner rod design makes it easy to operate;
7.304 stainless steel flame height scale, accuracy 0.5mm;
8.Stainless steel wire sample holder;
9.The top is equipped with a smoke exhaust fan device. After the test, the exhaust gas generated by the combustion is discharged.
Burner and gas control
| 1 | Burner angle | 0 to 45 degrees |
| 2 | Bunser burner size | imported from the United States has a tube length of 100mm ± 10mm and an inner diameter of 9.5mm ± 0.3mm; it fully meets the requirements of the IEC60695-11-4 standard |
| 3 | Pressure regulating valve and pressure gauge | 0 ~ 0.4Mpa |
| 4 | Blue flame height | control at 50mm ± 2mm; total height 100mm |
){kind=link}