ISO 5660 Cone Calorimeter for Heat Release Rate Analysis

• Customization: Available
• After-sales Service: Response in 12 Hours
• Warranty: 12 Months
• Model NO.: TCCT
• Power Supply: 220V, 50Hz
• Weight: 500kg
• Dimension: 1850mm (W) X 800mm X (H) X 2660mm (D)
• Gas Supplies: Methane, Nitrogen, Compressed Air
• Color: Black
• Conical Heater Power: 5000W
• Sample Weighing Range: 0 ~ 3000g
• Exhaust Fan Flow Rate: 0 ~ 50g/S
• Oxygen Sensor: Paramagnetic Type
• Test Objects: Building Materials, Cable and Wires
• Test Parameter: Heat Release Rate, Smoke Release, Oxygen Consumption
• Control: Computer
• Heat Output: 0 ~ 120 Kw / M2
• Sample Size: 100mm X 100mm
• Transport Package: Plywood Case
• Specification: Stainless steel
• Trademark: AI
• Origin: China
• HS Code: 9031809090
• Production Capacity: 10 Sets/Month

Product Description

Introduction

Heat release quantity is the core parameters to evaluate the fire behavior of materials and products.Our Cone Calorimeter can meet all existing standards (including ISO 5660, ASTM E 1354, ASTM E 1474, ASTM E 1740, ASTM F 1550, ASTM D 6113,NFPA 264,CAN ULC 135 and BS 476 Part 15).This equipment includes these systems such as heat release, mass loss, smoke generation, etc,and allow users to buy the parts they need one by one and add into the same chamber.This flexible feature is one of it's advantages.
Cone Calorimeter test theory is based on the principle that the burn calories is proportional to the amount of oxygen's consumption,1KG oxygen consumption will produce 13.1 MJ heat. Test gas heat emission, ignition timing, oxygen consumption rate, CO/CO₂ generation rate, the gas flow will be measured all. Cone Calorimeter DAQ system can help users to easily control the entire test. 19 "touch screen can help realizing the automatic testing and reducing installation space. In addition, users can also change the sample temperature, or adjust the temperature rise time to test,after setting up the virtual temperature at real fire conditions. This method can obtain the similar test results to real fire environment.

 

Standards

ASTM:ASTM D6113,ASTM E1354,ASTM E1740,ASTM F1550

BS:BS 476-15

ISO:ISO 5660

Features:
1,The cone calorimeter adopts 19-inch standard cabinet of integrated design, elegant, and easy to operate.
1.2,Conical Heater of 230V, 5000W, the heat output of 0 ~ 120 kW / m^2.
3.19-inch touch-screen computer controlling the entire testing process.
4,The cone calorimeter has functions of automatic ignition system,and automatic burning time calculation.
5.3 pieces K-thermocouples and 3 PID temperature controllers for temperature regulation.
6,Split gate -To protect samples area before the test, and insure the initial measurement stability.The operator could have extra time to detect before the test start. If there is no opening closing mechanism, the flammable samples are easy to burn too early. So this extra time is very important for the operator.
7,The sample holder -The sample size is 100mm x 100mm, and thickness is not exceed 50mm;The central portion of the sample about 50mm*50mm is exposed to the heating cone center and deviation is ±1%.
8,Weighting system -quality is measured by the strain gauge load cell test, accuracy up to 0.1g. Equipped with swift electronic weighing parts,mechanical stop fixture can avoid moving damage, to ensure the equipment longevity.Weighing range is 0 ~ 3kg.

Technical Specifications
1,Conical heater rated power is 5000W, heat output is 0 ~ 100 kW / m²_.
2,The sample weighing range is 0 ~ 3000g; precision is 0.1g.
3,Paramagn etic oxygen analyzer, the concentration range is 0~25%, an oxygen analyzer is linear response, imported oxygen sensor; 10% to 90% response time of less than 12s; output noise does not exceed 50ppm;. Reproduce the measured values lower than 100ppm,
4,Infrared CO₂ analyzer range: 0 to 10%; accuracy of ± 0.01%;
5,Exhaust fan flow 0 ~ 50g / s adjustable, precision 0.1g / s
6,The compressor works: cold trap: 0 to 5 degrees;
7,Import diaphragm pump, flow rate: 33 l / min
8,Thermopile type heat flow meter designed range 0 ^ 100k W / m², heat flow meter accuracy is ± 3%; repeatability is ± 0.5%
9,The standard detector color accuracy ± 5%, output linearity (transmission) <1%, absolute permeability <1%;

 

Installation requirements

1	Electrical	230 volts Nominal 50 Amps
2	Ambient Temperature	Operating 10°C to 35°C
3	Dimensions	1850mm (W) x 800mm x (H) x 2660mm (D)
4	Gas Supplies	Methane, Nitrogen, Compressed Air
5	Weight	500KG

Customer Feedback 

Italy

Germany

USA

Transporation

FAQ
1.What's the delivery time?
About 2~3 months .

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.