| After-sales Service: | Response in 12 Hours |
|---|---|
| Warranty: | 12 Months |
| Test Standard: | UL 9540A |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Introduction
1.The inner diameter of the experimental chamber cylinder is designed to be 450mm, and the total length is about 500mm. It is made of Q345R high-pressure steel plate. The overall impact pressure is above 5MPa and the maximum pressure is 7Map;
2.The main body of the cabin is integrally cast from steel, one end is fixed and welded with an elliptical head, and the other end is welded with a flange as an openable cabin door, which is sealed by a metal sealing ring. Both the cylinder and elliptical heads of this structure have the characteristics of high compressive strength and uniform force.
3.The cabin door and the cylinder body are connected by a rotating boom device, which can be unscrewed to the right. The diameter of the cabin door hole is 450mm and the cylinder body is the same, which is convenient for the installation of experimental samples and the arrangement of testing instruments.
4.After the door is closed, a full circle of bolts are used to tighten, which can withstand the maximum impact pressure of 5Mpa without leakage.
5.The air inlet is automatically controlled by a valve, which can complete the functions of nitrogen filling and purging.
Forced failure device of electric heating:
1.The equipment provides an automatic heating control system. The heating rate can be set. (Note: The battery heater is provided by the manufacturer according to the battery specifications)
2.The heating control system can control the maximum power of 2kw.
3.The heating temperature and heating rate can be set. Heating rate 4ºC~7ºC/min
4.The computer automatically controls the heating rate Equipped with battery and heater platform bracket.
Pressure measurement system:
1.It is composed of a high-pressure pressure gauge, a high-pressure sensor imported from Germany and an Omega vacuum pressure gauge;
2.The front end of the high-pressure sensor and the vacuum sensor are equipped with high-pressure ball valve protection, and the corresponding pressure measurement channel is automatically selected according to the operating procedure.
Temperature measurement system:
1.Imported Omega thermocouple;
2.Maximum support 8 channels of temperature signal acquisition (heating control temperature channel)
Control and detection system
1.Computer + Labview computer control system.
2.The program automatically controls the heating rate; the heating rate is 4ºC~7ºC/min.
3.Real-time temperature acquisition system, real-time temperature data curve generation.
4.Real-time monitoring of the pressure in the cabin.
5.The program automatically replaces the gas in the cabin to meet the oxygen concentration in the cabin less than 1%.
6.Equipped with automatic cleaning program for cabin gas.
Electrical interface description:
Electrical wiring requirements: (need to connect electrical wires from the outside to the cabin).
1. Temperature sensor wiring: 8 channels
2.Heating wire: 2 groups, 2KW each
3.Voltage signal line: 1 line
4.Spare signal lines: 6 lines
Specifications:
1.The size of the cabin: 1.5 meters wide X 2 meters long
2.Total equipment: 700KG
3.Power supply: 220V, 10kw.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}