| Customization: | Available |
|---|---|
| After-sales Service: | Response in 12 Hours |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
The main principle of the instrument is: process six typical metals used in the engine cooling system into test pieces, connect them into a test piece bundle after weighing, and then completely immerse in the specified sample. At the end of the test, take out the test piece, weigh it again after cleaning, and use the corrected test piece mass change value before and after the test to evaluate the corrosion. The instrument is suitable for high boiling point and diphenide engine coolant and its concentrate, and also for engine cooling system rust inhibitor.
| 1 | Applicable standards | ASTM D1384, SH/T0085 |
| 2 | Heating mode | electric heating pipe |
| 3 | Temperature control mode | digital PID temperature controller |
| 4 | Pressure display | Pressure gauge |
| 5 | Working units | 3,can extend to 4-6 |
| 6 | Timing method | digital timer |
| 7 | Pressure control | pressure stabilizing valve |
| 8 | Refrigeration method | low temperature ciruclating water |
| 9 | Flow speed control | flowmeter |
| 10 | Total power | 2500W |
| 11 | Dimension | 690*410*760mm3 |
| 12 | Weight | 31KG |
| 13 | Power supply | AC220V 50HZ |
Main features:
1.The pressure stabilizing valve controls the air inlet, and the flowmeter regulates the flow rate: 100ml / min ± 10ml / min;
2.Sputtering multi channel liquid circulator, which can ensure the temperature uniformity of each point;
3.Microcomputer temperature controller, digital display, accuracy ± 0.1 ºC, PT100 sensor;
4.Digital timer, recording the test time, with alarm;
5.Sand core glass gas diffusion head;
6.6 groups of metal test pieces is supplied with corrosion analysis, meeting the requirements of ASTM standards;
7.Safety protection device to prevent the liquid level from being too low;
8.The corrosion analysis has 3 working units, expandable to 4-6 units;
9.Quick disassembly device of condenser pipe;
Factory overview
Customer Feedback
Germany
FAQ
1.What's the delivery time?
){kind=link}