| Customization: | Available |
|---|---|
| After-sales Service: | Response in 12 Hours |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
This Dropping point apparatus is suitable to determine dropping point of lubricating grease.
Test method:fill grease into cup,record the temperature at which the grease reach to a liquid state under the conditions of test.
Characteristic of Manual Dropping Point Test Apparatus:
1.Glass tank is easy to observe.
2.Integrated structure is easy to operate.
3.Grease cup is made of chrome plated brass,inner diameter is Φ9.92mm,hole is Φ28mm,height is 12mm.It meets requirements of ASTM.
4.Two sample can be tested simultaneously by this dropping point apparatus.
5.Heating power can be adjusted at random.
6.There is stirrer above electric heating bath.
7.Heater is stainless steel.
8.The pressure gauge display heating status.
9.The case made by cold rolled steel,surface is treated by electrostatic spraying,rust resistant and easy to clean.
10.Safety device can prevent over-heat and low liquid level.
11.Contact control box is very convenient.
12.The dropping point apparatus has safety facilities preventing overheating and low water levels.
Technical specifications
| 1 | Applicable standard | GB/T4929,ASTM D566,ISO2176 |
| 2 | Pressure display | LCD |
| 3 | Temperature controlling accuracy | ±0.1ºC |
| 4 | Heating mode |
Electric heating tube |
| 5 | Total power | 800W |
| 6 | Working position | 2 units |
| 7 | Power supply | 220V,50Hz |
| 8 | Dimension | 210*220*390mm3 |
| 9 | Weight | 5KG |
){kind=link}