Cone Calorimeter Fire Testing Equipment

• Customization: Available
• After-sales Service: Response in 12 Hours
• Warranty: 12 Months
• Model NO.: ISO 5660
• Transport Package: Plywood Case
• Specification: Stainless steel
• Trademark: AI
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500pieces/Year
• Package Size: 180.00cm * 90.00cm * 260.00cm
• Package Gross Weight: 350.000kg

Product Description

Cone Calorimeter Fire Testing Equipment

 

INTRODUCTION

    Cone Calorimeter measures heat release rate(H.R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate when specimen is exposed to resource of conical heater. 

    Cone Calorimeter can meet all existing standards (including ISO 5660, ASTM E 1354, ASTM E 1474, ASTM E 1740, ASTM F 1550, ASTM D 6113,NFPA 264,CAN ULC 135 and BS 476 Part 15). This equipment includes these systems such as heat release, mass loss, smoke generation, etc,and allow users to buy the parts they need one by one and add into the same chamber.This flexible feature is one of it's advantages.
    Cone Calorimeter test is based on the theory that pure combustion calories are in proportion to a necessary amount of oxygen for combustion and 13.1 MJ/kg is generated whenever oxygen 1kg is consumed, and heat emission, ignition time, oxygen consumption, CO and CO2 generation, and flow of ignited gases as generated from test materials are measured.
Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment

STANDARD

• ISO 5660 : Reaction to fire tests - Heat release, smoke production and mass loss rate 
• ASTM E 1354 : Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter 
• BS 476 Pt.15 : Fire tests on building materials and structures - Method for measuring the rate of heat release of products 
• NFPA 264: Standard Method Of Test For Heat And Visible Smoke Release Rates For Materials And Products Using An Oxygen Consumption Calorimeter

 

FEATURES

1. Cone Calorimeter with movable analysis cabinet, can be connected with a large heat release rate test system such as ISO 9705, EN 13823 etc, complied with ISO 5660, ASTM E1354,BS 476 Part 15 etc. testing standards.
2. Integrated test body and 19 inches analysis cabinet, embedded PC 15 Inch Touch screen computer, for the whole control and automatic testing.
3. Conical heater rated power 5000W, the heat output of 0 ~ 100kW/m2, using PID temperature controller, while the radiation cone can be horizontal or vertical.
4. Exposed to the central part of the surface of the sample 50 x 50mm range, radiation at the center of the deviation is not more than 2%.
5. The sample weighing range 0 ~ 3000g; accuracy: 0.1g.
6. Auto Split Shutter automatically opened to transmit radiation to the sample.
7. ABB EL3020 Paramagnetic oxygen analyzer, using the method of paramagnetic change to measure the concentration of oxygen in the gas. Concentration range of 0-25%.
8. Smoke density analysis using laser system, the system consists of a 0.5mW He Ne laser, the main detector and auxiliary detector.
9. The exhaust system consists of the fan, the smoke collection cover, the exhaust pipe and orifice plate flow meter and so on. Exhaust fan flow rate of 0 ~ 50g/s, precision 0.1g/s.
10. Ring sampler have been installed from the smoke collecting hood at 685 mm, with 12 holes.
11. The exhaust flow rate should be determined by measuring the pressure difference on both sides of the sharp edge orifice 350 mm above the fan, the inner diameter of the sharp edge orifice plate is 57mm + 1mm.
12. ABB SCC-S Gas sampling system comprises sampling pump, filter, cold trap, waste water discharge, water filters and CO2 filters;
13. Portable water cooling system without need for waterworks and plumbing when using the Heat Flux meter (for ISO 5660).
14. In order to calibrate the response of the whole test system, the use of a square opening brass calibration burner, used to measure the value of C- coefficient
15. The data acquisition system be able to record oxygen analyzer, orifice meter, thermocouple and other instruments of the output.

Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment Cone Calorimeter Fire Testing Equipment 

APPLICATION SCOPE

      Building Materials,Rail,IMO,Wire & Cable and others


THE COMPLETE SYSTEM


ISO5660 Cone Calorimeter Test Machine for Heat Release Rate Analysis ISO5660 Cone Calorimeter Test Machine for Heat Release Rate Analysis ISO5660 Cone Calorimeter Test Machine for Heat Release Rate Analysis 
 

FACTORY

FAQ

1.What's the delivery time?
About 2~3 months .

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.