Full Scale Room Corner Combustion Tester

• After-sales Service: Response in 12 Hours
• Warranty: 12 Months
• Test Standard: ISO 9705, ASTM E1537, ASTM E 603, ISO 13784-1
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: AIC-9705
• Power Supply: AC 380V, 60Hz, 50A
• Dimension of Internal Room: 3.6m X 2.4m X 2.4m
• Gate Size: 0.8m (W) X2.0m (H)
• Weight: About 7, 500kg(Cabinet), 130kg(Control Panel)
• CO2 Analyzer Range: 0 to 10%
• Flow Rate of Suction Pump: 33L/Min
• Transmittance Filters: 0%, 25%, 50%, 75%, 100%
• Delivery Time: About 3 Months
• Test Object: Upholstered Furniture, Wall and Ceilings
• Control: Labview and PC
• Density of Fireproof Material: 700kg / M³-A1
• Language: English
• Response Time of O2 Sensor: Less Than 12s
• Cold Trap: 0 to 5 Degrees
• Transport Package: Plywood Case
• Specification: fireproof material
• Trademark: AI
• Origin: China
• HS Code: 9031809090
• Production Capacity: 10 Sets/Month

Product Description

Introduction:

According to ISO 9705 of building materials fire prevention performance standards, this fire test machine control platform provides independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument, He-Ni laser smoke density measurement and control system, etc.
Full-scale room corner test methods for surface of the article use the same principle with the cone calorimeter and SBI testmethod thatis based on the oxygen consumption. The method is to simulate the corner of the fire scene as a standard testconditions, and installation of a test sample entirely according to actual use, the test results apply only to specific sample installation, it is one of the most reliable standard test methods. In the corner fire test, in accordance with the requirements of ISO 9705, and the measured material mounted on the inner walls of the room (at the top is not installed).Using propane burners as a radiation source, the measurement of heat release rate, temperature, heat release, flashover time, CO2 /CO and other parameters, for which the most important is the heat release rate and the flashover time.

Standard:
• ISO 9705: Large Box test surface of the product
• ISO 13784-1: plywood building systems Reaction to fire test
• ASTM E 1537: Standard upholstered furniture flame test method
• ASTM E 603: Standard guidance corner combustion experiments

Feature

• The test room is built by the density of 700kg / m³-A1 class fireproof material.

• The internal dimensions of the room 3.6M X 2.4M X 2.4M.

• The gate size: 0.8M (W) X2.0M (H).

• Sandbox burner with propane gas and equipped with emergency shut-off devices.

• Automatic ignition system to automatically record experimental data.

• Independently movabletimetto display units.

• 10kV spark ignition, a cease-fire with safety devices. Fire extinguishing drainage system design.

• The full scale room corner tester is equipped withstaircasefor easy maintenance exhaust pipes.

Gas sampling and analysis system:

1, Gas sampling system includes an annular sampler probe, suction pump, particulate filter, a cold trap, exhaust valve, water filters and CO2 filter.
2, Three filters; Minimum filtration accuracy is 0.5um.
3, Freezing cold trap; air-conditioning compressor refrigeration systems; controlling the temperature in 0 ~ 5ºC.
4, Suction pump,Flow rate is 33L/min,vacuumis 700mmHg, and pressure is 2.5 bar.
5, Drying cylinder, whichfilterthe water and impurities.
6, The flow controller to control the inspiratoryair flow.
7, The sampler has 12 holes and gas flow in the opposite direction, these holds built-in dust filter and 685mm from hoods.
8, Paramagnetic oxygen analyzer, the range is 0-25%; linear response; imported Britain Servomex oxygen sensor.
 

Smoke system

1, Full Scale Room Corner Combustion Tester adopts 0.5W HE-NE laser source.
2, Thorlabs optically detector.
3, Motor driven 5 class automatically calibration device with of 0%, 25%, 50%, 75%, 100% transmittance filters.
4, Full Scale Room Corner Combustion Tester adopts one touch calibration system in software with digital and curve display.

DAQ system

1, 16 bit data acquisition module is adopted by Full Scale Room Corner Combustion Tester.
2, Digital communication between computer and DAQ module.
3, Labview based application software on DAQ and data analysis.

 

Operating system

1, Labview based application system,easilyand precise to operate and control.
2, Test status, calibration status display on screen.
3, Device status are displayed on screen and indicators onpanel.
4, Transducers data, process parameters, test result displayed onscreenvia digital and curve.
5, Test and calibration procedure auto executed by PLC program.
6, Full Scale Room Corner Combustion Tester can be controlled via both application screen and control panel.
7, PC and PLC communicate with digital protocol which is safe and robust.

 

Technical Specifications

1,Paramagn eticoxygen analyzer, the concentration range is 0~25%, an oxygen analyzer islinearresponse, Britain Servomex oxygen sensor; 10% to 90% response time of less than 12s; output noise does not exceed 50ppm;Reproduce the measured values lower than 100ppm,
2, Infrared CO2 analyzer range: 0 to 10%;accuracy of ± 0.01%;
3, The compressor works: cold trap: 0 to 5 degrees;
4, Import diaphragm pump, flow rate: 33 l / min
5, The standard detector color accuracy ± 5%, output linearity (transmission) <1%, absolute permeability <1%;

 

Test Data

1, Heat Release Rate (HRR),
2, Total Heat Release (THR),
3, Efficiency Heat Release (EHR),
4, Smoke Production Rate (SPR),
5, Time to Ignite (TTI),
6, Time to flameout,
7, Oxygen Consumption Rate,
8, CO2 Production Rate,
9, CO Production Rate(optional)

Installation requirements

Size	11,725(W)x4,000(D)x4,750(H)mm
Console Size	600(W)×750(D)×1800(H)mm
Power supply	AC 220V, 50/60Hz, 15A (control), AC 380V, 60Hz, 50A(drive)
Weight	About 7,500kg(Cabinet), 130kg(Control panel)
Exhaust	Minimum 3.5m2/s(Measuring), Minimum 300m2/min(Exhaust)
Other requirements	CO(0.8%)/CO2(8%), Compressed gas, Vacuum cleaners, Computers, Propane gas, Heptane gas, Nitrogen

Factory overview

Customer Feedback 

Germany

USA

Transporation

FAQ
1.What's the delivery time?
About 3 months.

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.