| Customization: | Available |
|---|---|
| After-sales Service: | Response in 12 Hours |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
The test method of Cavitation Corrosion and Erosion-Corrosion Characteristics Tester is: pump the sample with a standard aluminum automobile water pump, run it for 100h under the conditions of 113 ºC, 103kpa and pump speed of 4600r / min, and then check the water pump to determine the degree of cavitation corrosion, and grade it according to the grading system table.
Characteristic
1. The Cavitation Corrosion and Erosion-Corrosion Characteristics Tester is composed of operation and display, heating control, speed control, pressure control, flow control system and supporting components;
2. Motor: used for coolant circulation drive, linked with water pump;
3. Water pump: the standard ASTM D method requires imported water pump;
4. Vacuum pressure gauge: digital display of real-time pump inlet vacuum;
5. Throttle valve: used to regulate the flow rate of water pump;
6. Heater: heat the coolant to the test temperature;
7. Liquid storage tank: stores cooling liquid for pipeline system;
8. Heat exchanger: provide 35 ~ 38 ºC test temperature through cooling water heat exchange;
9. Regulating valve: three regulating valves are used to adjust vacuum degree and test pressure;
10. Pressure gauge: displays the pressure during the test;
11. Expansion tank: steam expansion device
Technical specifications of ASTM D2809 Cavitation Corrosion and Erosion-Corrosion Characteristics Tester
| 1 | Applicable standards | ASTM D2809, SH/T0087 |
| 2 | Environmental requirements | 20 ºC ~ 25 ºC, humidity < 60% |
| 3 | Fuse | 20A |
| 4 | Pump speed | 0 ~ 4600 ± 100r / min |
| 5 | Temperature control range | < 650 ºC |
| 6 | Resolution (measurement) | 0.1 ºC |
| 7 | Temperature control accuracy | ± 0.1 ºC |
| 8 | Flow range | 0 ~ 20ml / min |
| 9 | Flow control accuracy | ± 5% |
| 10 | Power supply | AC220V 50Hz |
| 11 | Power consumption | 6.5KW |
Germany
FAQ
1.What's the delivery time?
){kind=link}