ASTM E1321 Material Ignition and Flame Spread Characteristics Test Equipment

• After-sales Service: Response in 12 Hours
• Warranty: 12 Months
• Test Standard: ISO 5658-2, ASTM E 1317, ASTM E1321
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SFT
• Power Supply: 110V AC 60Hz / 230V AC 50Hz, 10A
• Weight: 228kg
• Dimension: 1650 mm (W) X 810 mm (H) X 1985 mm
• Gas Supplies: Propane Gas, Methane Gas, Compressed Air
• Sample Size: 155mmx800mm
• Radiating Surface: 480 mm X 280 mm
• Display: Computer
• Color: White
• Operation: Automatic
• Function: Test Material Ignition and Flame Spread Properties
• Test Object: Building Materials, High-Speed Train Materials etc
• Air Source: Supplied by Blower
• Flame Temperature: 1kw and 3kw
• Stucture: Separated
• Transport Package: Plywood Case
• Specification: Stainless steel
• Trademark: AI
• Origin: China
• HS Code: 9027809990
• Production Capacity: 30 Sets/Month

Product Description

Introduction

The Flame Spread Properties Test Equipment is used for the combustion characteristics of building materials, high-speed train materials, and ship materials. It measures the flame spread speed, ignition heat and total heat release according to distance and CEF (critical heat radiation flow). This test method is used to evaluate the burning characteristics of test objects installed vertically in accordance with ISO 5658-2 and IMO Res.653. At the same time, the Flame Spread Properties Test Equipment meets the GB/T 28752-2012 test method for the lateral spread of flame on vertical surfaces. The test object is exposed to the appropriate heat dissipation area given by the gas combustion type of the heat sink, and then when combustion occurs, the signal value is measured in mV using a calibrated thermocouple. In addition, the ignition time is also recorded and the flame burning time of the test object is recorded according to the distance of the test object, and the flame spread speed is also recorded.
Other test items include ignition heat (MJ/m2), continuous combustion heat (MJ/m2), critical heat radiation flow (kW/m2), average heat of continuous combustion and total heat dissipation (kW).


Standads:

• ISO 5658-2 : Reaction to fire tests Spread of flame - Part 2 Lateral spread on building products in vertical configuration

• IMO Resolution A. 653(16): Recommendation on fire test procedures for flammability of bulkhead, ceiling and deck finish materials

• ASTM E1317 : Standard test method for flammability of marine surface finishes
  ASTM E1321 :Standard Test Method for Determining Material Ignition and Flame Spread Properties

Feature

1. The Flame Spread Properties Test Equipment consists of four main components: a set of radiant plate holders and a set of sample holders. At the same time, connect them together so that the test sample, the radiant plate, the sample holder, and the pilot burner form the required structure;
2. The radiant panel provides a radiating surface with a size of about 480 mm X 280 mm, and a wire mesh screen is provided in front of the radiating surface to increase the radiance;
3. Use a blower to provide the air source for the radiant panel, and use a frequency converter to adjust;
4. Adopt propane mass flow controller to adjust the gas source, cooperate with the Venturi mixer to mix with air, and provide the combustion gas source required by the radiant panel;
5. The Flame Spread Properties Test Equipment provided a multi-hole calibration plate and a sliding heat flow meter moving track, which can detect whether the heat radiation flux meets the standard requirements;
6. Water-cooled heat radiation flux sensor is used to measure the heat radiation flux curve of radiant panels;
7. Portable water cooling circulation device, which can take away the surface heat of the heat flow meter;
8. The ceramic tube burner can directly act on the surface of the test sample with an open flame;
9. Adopting rotor flowmeter adjustment method, which can provide ceramic tube burner with mixed combustion gas;
10. The mass flow controller can easily measure the heat of methane by measuring the critical heat flux;
11. According to IMO test standards, thermocouple devices can be provided to measure related parameters such as heat release rate;
12. Methane calibration burner and methane mass flow controller can provide 1KW and 3KW flame temperature;
13. During the test, the camera can observe and save the measurement status in the program;
14. The Flame Spread Properties Test Equipment is equipped with an angle-adjustable observation mirror, the flame spread rate can be observed through the glass mirror and sample rake during the test, and can be automatically recorded by the foot switch;
15. Computer and standard test software are used to control the test process.

Installation requirements

Electrical	110V AC 60Hz / 230V AC 50Hz, 10A
Ambient Temperature	10°C to 35°C
Gas supplies	Propane Gas, Methane Gas, Compressed Air
Optional gas	Acetylene Gas
Dimensions	1650 mm (W) x 810 mm (H) x 1985 mm
Weight	228KG
Applicable standards	ISO 5658-2,ASTM E 1317,ASTM E1321,IMO Resolution A. 653(16)

 

Customer Feedback 

Germany

USA

Transporation

FAQ
1.What's the delivery time?
About 60 days .

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support. 

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.