| After-sales Service: | Response in 12 Hours |
|---|---|
| Warranty: | 12 Months |
| Type: | Fuel Testing Machine |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Introduction
This Aging Bath is used to determine the total sediment in residual fuel oil with a viscosity of less than 55 mm2/s at 100°C and distillate fuel oil blended with residual components. The maximum total sediment of residual fuel oil is 0.5% (m/m), and the maximum total sediment of distillate fuel oil blended with residual components is 0.40% (m/m)..
Method summary
Under the specified conditions, the residual fuel oil sample is aged for 24 hours at 100°C, and then the sample is filtered through a specified instrument at 100°C, and the total sediment on the filter paper is washed and dried with a solvent before weighing weight. The test should be repeated.
Main feature
1. This total sediment measuring instrument is equipped with special aging bath.
2. Standard filtering elements,with heating and cooling coils.
3. Aperture of glass fiber filter paper:0.0016mm,diameter 47mm.
4.Stainless steel ball valve can switch heat and cool source.
5.Digital time relay controls working time.
6.Micro-computer PID temperature controller,PT100 temperature sensor,high temperature controlling accuracy.
Technical specifications
| 1 | Sample quantity | 25g |
| 2 | Volume of waste flask | 500ml |
| 3 | Measuring range | 0.5%(m/m) |
| 4 | Test units | Two |
| 5 | Absolute vacuum pressure | 40Kpa |
| 6 | Applicable standards | ASTM D4780,SH/T0701,SH/T0702 |
| 7 | Power supply | AC220V 50HZ |
FAQ
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}