| Customization: | Available |
|---|---|
| After-sales Service: | Response in 12 Hours |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Vertical Flame Tester is designed to measure the flame spread times of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich combinations, and similar combinations) when subjected to a small, defined flame.
Test Principle:
A defined flame from a specified burner is applied for 10s to the surface or the bottom edge of textile specimens that are vertically oriented. The flame spread times in seconds for the flame front to travel between marker threads positioned adjacent to the surface of the test specimen and located at three distances from the igniting flame, are recorded.
Standard:
ISO 6940, ISO 6941, ISO 15025, ECE R118,95/28/EC
1. The sample fixing frame is made of stainless steel, the frame is 560mm high and 170mm wide. There are 27mm fixed needles with a diameter of 2mm and a limit needle with a height of 20mm and a diameter of 2mm on the specimen frame.
2. The Flame Spread Properties Test Equipment is equipped with a stainless steel-like U-shaped pressing plate with a thickness of 1.0mm.
3. The burner is made of brass, and its structure and dimensions meet the standard requirements. The burner can be vertical and adjusted at 30 degrees from the plane of the sample. The distance between the top of the burner and the bottom of the sample is 20mm. The specimen is pushed in the vertical direction and the positioning size can be adjusted to adapt to the fire position of specimens of different thicknesses.
4. High-voltage pulse automatic ignition, and equipped with automatic fire extinguishing function.
5. The fixed position of the marking line can be adjusted to suit different thickness samples. It adopts heavy hammer + sensor to sense the arrival time of combustion, which is convenient and reliable.
6. The Vertical Flame Test Equipment uses PLC+touch screen control to realize control/detection/calculation/data display.
7. All timings are automatic timing, and the fire will be automatically extinguished after the fire time is reached;
8. It can automatically calculate the burning speed and save the data.
Installation requirements:
| Electrical | 220V,2A |
| Ambient Temperature | Operating 25±5ºC |
| Dimensions | 340mm(L) X 600mm(D) X 900mm(H) |
| Weight | 40KG |
| Applicable standards | ISO 6940,ISO 6941,ISO 15025,95/28/EC,ECR118 |
| Gas | Industrial Propane |
){kind=link}