| After-sales Service: | Response in 12 Hours |
|---|---|
| Warranty: | 12 Months |
| Display: | PC |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product introduction
This Fire Potential and Oxidizing Ability Tester is used to determine whether the oxidizability of a gas or mixed gas is higher than that of air, and can be used to test toxic and corrosive gases or their mixed gases.
Standard
ISO 10156:2010 specifies methods for determining whether or not a gas or gas mixture is flammable in air and whether a gas or gas mixture is more or less oxidizing than air under atmospheric conditions. It is intended to be used for the classification of gases and gas mixtures including the selection of gas cylinder valve outlets.
Main features:
1) The split structure design of test device and control system is adopted to ensure the safety of instrument control unit and laboratory personnel;
2) Supporting PC operation software to reduce the difficulty of instrument operation;
3) Support remote ignition to ensure the safety of experimenters;
4) The Fire Potential and Oxidizing Ability Tester is equipped with high-precision pressure sensor, it can accurately measure the explosion pressure and control the gas partial pressure concentration;
5) Equipped with magnetic stirring device;
6) It has the function of electronic micro control processor to control ignition time;
7) The Fire Potential and Oxidizing Ability Tester is supplied with automatic cleaning function;
8) With automatic pressure relief device, automatic pressure relief can be selected after the test to release the pressure in the test tank;
9) It has multiple explosion-proof functions to ensure the safety of laboratory personnel;
10) With fault detection and automatic audible and visual alarm function;
11) The test process is fully automated, without manual intervention, and supports parameter setting, data storage, report viewing and other functions.
Technical parameter
| Working condition | (-5~45)ºC,<95%RH |
| Material of test tank | Stainless Steel 316L |
| Maximum bearing pressure of test tank | ≥3000kPa |
| Volume of test tank | ≥0.005m³ |
| Spares of test tube | magnetic stirrer |
| Ignition system metal bar | Diameter ≥3mm |
| Nickel chromium wire diameter | (0.05~0.2)mm |
| Ignition energy | (10~20)J |
| Detection range of explosion pressure sensor | (0~5000)kPa |
| Explosion sensor withstand voltage | ≥10MPa |
| Measurement accuracy of explosion sensor | ±0.1%FS |
| Response time of explosion sensor | ≤1ms |
| Detection range of gas distribution sensor | (0~200)kPa |
| Measurement accuracy of gas distribution sensor | ±0.1%FS |
| Temperature measuring range | (0~350)ºC |
Factory overview
FAQ
1.What's the delivery time?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}