| After-sales Service: | Response in 12 Hours |
|---|---|
| Warranty: | 12 Months |
| Test Standard: | En 136 |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product introduction
The Thermal Radiation Resistance Test Machine is suitable for testing the radiation resistance of full face mask respiratory protective devices in EN136 standard. Its purpose is to detect whether the mask will cause protection failure after being exposed to the standard heat radiation source after the standard test time.
Full face masks for diving apparatus are not included in the scope of this standard.
Performance characteristics
1. The Thermal Radiation Resistance Test Machine is equipped with electric heating tube heating device, the main heater power is 4000W, the auxiliary heater power is 2000 W, which is regulated by two PID temperature controllers.
2. Stainless steel reflector used to enhance the thermal radiation performance applied on the mask;
3. The Thermal Radiation Resistance Test Machine has metal head mould device, which can wear face mask and breathe freely;
4. The sliding track of the metal head mould can move its horizontal position and adjust the distance from the mask to the radiator.
5. The Thermal Radiation Resistance Test Machine is provided with a water-cooled heat flow meter for measuring the heat radiation flux at the standard distance;
6. The Thermal Radiation Resistance Test Machine adopts artificial lung breathing device, breathing is a sinusoidal output mode, which truly simulates human breathing.
7. PLC control mode, breathing frequency and breathing volume can be set freely.
8. Micro-differential pressure sensor device can automatically detect the failure of the mask in the process of testing.
Installation requirements
| 1 | Power supply | 220V,30A |
| 2 | Dimension | 1,240(W)X700mm(D)X1,600(H)mm |
| 3 | Weight | 152KG |
| 4 | Test object | Full face mask |
| 5 | Test standard | EN 136,GB/T 16556 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}